Showing 1–12 of 51 results

  • 2019 BaoFeng UV-S9 Powerful 8 WRadio
    2019 BaoFeng UV-S9 Powerful 8 WRadio

    2020 BaoFeng UV-S9 Powerful Walkie Talkie CB Radio Transceiver 8W

    Dimensions: 400mm Length
    Frequency Range: uhf/vhf
    Walkie Talkie Type: Portable
    Model Number: Nagoya NA-771
    Brand Name: BAOFENG
    Talk Range: Enhanced intercom distance
    Connector: SMA-Female
    Antenna Max Power: 10W
    Antena Weight: 28g
    Gain(MAX): 2.15db (144MHz)/3.0db(430MHz)
    Uhf Vhf Antenna: NA-771
    NA-771: walkie talkie Baofeng Antenna
    Type: Accessories

    not rated 52.0058.00
  • Sale!
    Man Knee protection pants
    Man Knee protection pants

    3/4 Sport Trousers With Knee Pads Protection

    Better not have a bad landing! But just in case – there is always this one stone on the perfect field that finds exactly this one knee that touched the ground, isn’t it? These comfy pants will solve this problem for you and will protect your knees – just in case!

    Thin breathable fabric, can be used underneath your normal flying pants.

     

    Please check the size table – the sizes are rather on the small side, so might need +1 size to your typical measure.

     

     

     

    not rated 40.00 35.00
  • Sale!
    Hang Gliding Calendar
    Jonny Durand Hang Gliding Calendar

    AdventureFlying Hang Gliding Calendar 2019

    This calendar has a collection of 12 outstanding hang gliding pictures of 9 pilots.

     

    The material was shot during AdventureFlying Projects all over the world in the last two years.

     

    Printed on the thick and nice to touch paper this product will fit any wall.

     

    Size A3 (42×26 cm)
    Tip: Take an advantage of a collective order to save on the shipment costs. In EU it almost doesn’t make a difference whether the 1 or 3 copies are shipped.
    not rated 23.90 13.90
  • Sale!
    Hang Gliding Instrument Pod Flytec Compeo Digifly Air
    Hang Gliding Instrument Pod Flytec Compeo Digifly Air

    Altair Hang Gliding Dual Pod I

    Key features:

    – Pod housing is made to fit Compeo, Digifly AIR and Naviter Oudie4 instruments (*please note – the housing not interchangeable like on our Universal Pod, the hole form allows to use any of these instruments);

    – Secondary pod hole allows to use a smartphone up to 148x77mm with Compeo installed and up to 155x77mm with Digifly AIR.

    – Charging cable included, no powerbank inside

    – Charging socket for powerbank – on the front panel, so there is no need to take out the powerbank for charging.
     

    3D PRINTED BASEBAR BRACKETS are sold separately for: 35/40 euro – Click Here

    For the customers from the USA, Norway, Benelux countries and Canada – Please contact your Altair dealer for purchasing this productThe list of the dealers can be found here.

    not rated 200.00 190.00
  • Dual Pod II Hang Gliding
    Dual Pod II Hang Gliding

    Altair Hang Gliding Dual Pod II

    Key features:

     NEW sleek shape

    – Pod housing is made to fit Compeo, Digifly AIR and Naviter Oudie4 instruments (*please note – the housing not interchangeable like on our Universal Pod, the hole form allows to use any of these instruments)

    – Secondary pod hole allows to use a smartphone or tablet up to 165mm with Compeo installed and up to 174mm with Digifly AIR.

    Place for the suggested powerbank (MI Powerbank 2S, capacity 10000 mAh)

    Powerbank is not installed

    – Micro USB charging cable included, Type C or Lightning – on demand

     

     Suggested mount – M8 female thread on pod (Flytec rod mount or other types – on demand) 

    3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here

    For the customers from the USA, Norway, Benelux countries – Please contact your Altair dealer for purchasing this productThe list of the dealers can be found here.

     

    If you choose the aquaprint option for the color we will contact you for the details to discuss your preferences!

    not rated 200.00243.00
  • Sale!
    Hang Gliding Instrument Pod Flytec Compeo Digifly Air
    Hang Gliding Instrument Pod Flytec Compeo Digifly Air Powerbank

    Altair Hang Gliding Dual Pod Power I

    Key features:

    – Pod housing is made to fit Compeo, Digifly AIR and Naviter Oudie4 instruments (*please note – the housing not interchangeable like on our Universal Pod, the hole form allows to use any of these instruments);

    – Secondary pod hole allows to use a smartphone up to 148x77mm with Compeo installed and up to 155x77mm with Digifly AIR.

    Powerbank inside: assembled MI Power Bank 2, MI Power bank 5000 (for lighter setup) or MI Power Bank Pro (or similar and less size).

    – Charging socket for powerbank – on the front panel, so there is no need to take out the powerbank for charging.

    – Powerbank buttons on the front face of the pod

     

    3D PRINTED BASEBAR BRACKETS are sold separately for: 35/40 euro – Click Here

    For the customers from the USA, Norway, Benelux countries and Canada – Please contact your Altair dealer for purchasing this productThe list of the dealers can be found here.

    not rated 220.00 210.00
  • Dual Pod II Hang Gliding
    Dual Pod II Hang Gliding

    Altair Hang Gliding Dual Pod POWER II

    Key features:

     NEW sleek shape

    – Pod housing is made to fit Compeo, Digifly AIR and Naviter Oudie4 instruments (*please note – the housing not interchangeable like on our Universal Pod, the hole form allows to use any of these instruments)

    – Secondary pod hole allows to use a smartphone or tablet up to 165mm with Compeo installed and up to 174mm with Digifly AIR.

    Powerbank: MI Powerbank 2S, capacity 10000 mAh

    Powerbank is installed, powerbank buttons on the front face of the pod

    – Micro USB charging cable included, Type C or Lightning – on demand

     Charging socket for powerbank – on the front panel, so there is no need to take out the powerbank for charging.

     

     Suggested mount – M8 female thread on pod (Flytec rod mount or other types – on demand) 

    3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here

    For the customers from the USA, Norway, Benelux countries – Please contact your Altair dealer for purchasing this productThe list of the dealers can be found here.

     

    If you choose the aquaprint option for the color we will contact you for the details to discuss your preferences!

    not rated 220.00263.00
  • Dual Pod II Hang Gliding
    Dual Pod II Hang Gliding

    Altair Hang Gliding Dual Pod POWER with BT Vario and Pitot tube II

    – AltAIR bluetooth vario with speed sensor (Pitot tube) and 4 key keyboard on the front panel

     NEW sleek shape

    – Pod housing is made to fit Compeo, Digifly AIR and Naviter Oudie4 instruments (*please note – the housing not interchangeable like on our Universal Pod, the hole form allows to use any of these instruments)

    – Secondary pod hole allows to use a smartphone or tablet up to 165mm with Compeo installed and up to 174mm with Digifly AIR.

    Powerbank: MI Powerbank 2S, capacity 10000 mAh

    Powerbank is installed, powerbank buttons on the front face of the pod

    – Micro USB charging cable included, Type C or Lightning – on demand

     Charging socket for powerbank – on the front panel, so there is no need to take out the powerbank for charging.

     

     Suggested mount – M8 female thread on pod (Flytec rod mount or other types – on demand) 

    3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here

    For the customers from the USA, Norway, Benelux countries – Please contact your Altair dealer for purchasing this productThe list of the dealers can be found here.

     

    If you choose the aquaprint option for the color we will contact you for the details to discuss your preferences!

    not rated 300.00343.00
  • Skytraxx3 Vario Pod
    Skytraxx3 Vario Pod

    Altair Hang Gliding Pod for Skytraxx 3 Vario

    • Made especially for users of SkyTraxx 3 varios.
    • Fiberglass with aquaprint carbon-like coating

     

    We suggest using 8 mm bolt size for the Pod and the mount.

    3D PRINTED BASEBAR BRACKETS are sold separately for: 40€ – Click Here

    For the customers from the USA, Norway, Benelux countries and Canada – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.

    not rated 190.00
  • Hang Gliding Instrument Pod Smartphone
    Hang Gliding Bracket Holder Mount for Speedbar

    Altair Hang Gliding Racing Pod Smartphone 83×154 mm

    Made especially for users of XCSoar, XCTrack, LK8000 and AltAIR programs.

    • Use of almost any smartphone up to 5,5” screen (max phone size 83×154 mm) Built-in 10000 mAh powerbank to keep smartphone charged all day
    • Possibility to change batteries (3×18650 type Li-Ion cells are used)
    • Possibility to use any upright/speedbar mounts including Flytec/Brauniger
    • … further descriptions see below

    The Racing Pod (shell only)95€

    The Racing Pod POWER with powerbank board, batteries and charging cable 120€

    The Racing Pod AltAIR with powerbank, control keys and AltAIR Bluetooth sensor with Pitot tube220€. Limited production. Production time up to 2 months.

    3D PRINTED BASEBAR BRACKETS are sold separately for: 40€ – Click here

    For the customers from the USA, Norway, Benelux countries and Canada – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.

    not rated 95.00220.00
  • Hang Gliding Upright Mount Holder Bracket
    Hang Gliding Upright Mount Holder Bracket

    Altair Upright Brackets/Holders 6/8 mm

    More info down below.

     

    For the customers from the USA, Norway, Benelux countries and Canada – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.

    not rated 35.0040.00
  • Vario Pod Hang gliding

    Aquaprint FB Individual Hang Gliding POD for Compeo+/6030, Digifly, Flymaster, Odie 4, Volirium, Ebook, Smartphone

    Individual intrument pod available for Flytec6030/Compeo+, Digifly AIR, Oudie4. Volirium P1, Flymaster Live, smartphone, E-reader

    Please bear in mind the speedbar/upright bracket is sold separately here.

    Got some rare or handmade instrument? You can even print a cover on a 3D printer.

    Price: EUR 180

    3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here

    For the customers from the USA, Norway, Benelux countries – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.

     

    If you choose the aquaprint option for the color we will contact you for the details to discuss your preferences!

    not rated 185.00