Showing all 7 results

  • Hang Gliding Bracket Holder Mount for Speedbar
    Hang Gliding Bracket Holder Mount for Speedbar

    Altair Speed Bar Brackets/Holders/Mounts

    Please find our upright brackets here:  Altair Upright Brackets/Holders/Mounts

     

    For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.

     

     

     

     

     

     

     

    not rated 40.00
  • hang gliding gopro insta camera mount
    hang gliding gopro insta camera mount

    FlexiClamp for Front Keel | Hang Gliding Camera Mount

    Elevate your video capturing capabilities with the Delta Front Keel Tube Camera Mount, enhanced by our FlexiClamp. Specially designed for tubes of 50-54 mm, this mount offers a light, flexible, and strong attachment through the glider’s zipper.

     

    It features a rotatable tube for precise camera adjustments, enabling 360-degree shots for versatile framing options. Installation is quick and easy. You will once need to install two additional zipper sliders (don’t worry it takes just a few minutes — see instructions below) suitable for your under-surface sail and you are good to go.

     

    not rated 62.50
  • hang gliding gopro insta camera mount
    hang gliding gopro insta camera mount

    FlexiClamp for Wing Tip | Hang Gliding Camera Mount

    Capture breathtaking aerial footage with our FlexiClamp Wing Tip Camera Mount, featuring our unique Flexi Clamp. This innovative clamp is designed for flexibility and durability, ensuring a perfect fit on the outer leading edge of hang gliders with tube diameters of 48-52 mm.

     

    The FlexiClamp is lightweight yet sturdy, maintaining a secure hold without adding extra weight. Equipped with a safety hinge and a rubber-lined grip, it positions your camera for optimal shooting as the wing tip pops during flight, ideal for pilots seeking stable, high-quality footage from a wing tip angle.

    not rated 67.50
  • Dual Pod II Hang Gliding
    Dual Pod II Hang Gliding

    Altair Hang Gliding Dual Pod II

    Key features:

     NEW sleek shape

    – Pod housing is made to fit Compeo, Digifly AIR, Flymaster and Naviter Oudie4 instruments (*please note – the housing not interchangeable like on our Universal Pod, the hole form allows to use any of these instruments)

    – Secondary pod hole allows to use a smartphone or tablet up to 165mm with Compeo installed and up to 174mm with Digifly AIR and Flymaster.

    Place for the suggested powerbank (MI Powerbank 2S, capacity 10000 mAh)

    Powerbank is not installed

     

     Suggested mount – M8 female thread on pod (Flytec rod mount or other types – on demand) 

    3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here

    For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.

     

    If you choose the aquaprint option for the color we will contact you for the details to discuss your preferences!

    not rated 203.00235.00
  • Hang gliding Altair Dual Pod DigiFly
    Altair Hang Gliding Dual Pod II

    Altair Hang Gliding Dual Pod POWER with BT Vario and Pitot tube II

    Dear friends, unfortunately we are short of vario units suppplied from the USA, therefore the production of this Pod is currently on hold. We hope the microchips will be available in the nearest future.

     

    – AltAIR bluetooth vario with speed sensor (Pitot tube) and a new programmable 9 keys keyboard (18 functions!) on the front panel

     NEW sleek shape

    – Pod housing is made to fit Compeo, Digifly AIR, Flymaster and Naviter Oudie4 instruments (*please note, the housing is not interchangeable like on our Universal Pod, but the hole shape allows to use any of these instruments)

    – Secondary pod hole allows to use a smartphone or tablet up to 165mm with Compeo installed and up to 174mm with Digifly AIR and Flymaster.

    Powerbank: MI Powerbank 2S, capacity 10000 mAh

    Powerbank is installed, powerbank buttons on the front face of the pod

    – Micro USB charging cable included, Type C or Lightning – on demand

    Charging socket for powerbank – on the front panel, so there is no need to take out the powerbank for charging

     Suggested mount – M8 female thread on pod (Flytec rod mount or other types – on demand)

     

    3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here

    For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this productThe list of the dealers can be found here.

     

    Choose from one of our unique AquaPrint Looks for the Pods. See the Image with the number down in the description.

     

    If you like a special aquaprint option for the color — contact you for the details to discuss your preferences!

    not rated 325.00355.00
  • Altair Vario Pod for Naviter Oudie N
    Aquaprint Options

    Altair Hang Gliding Pod for Naviter Oudie N/Oudie N FLARM

    • Made especially for users of Naviter OudieN/OudieN FLARM varios.
    • Fiberglass with aquaprint carbon-like coating

     

    We suggest using 8 mm bolt size for the Pod and the mount.

    3D PRINTED BASEBAR BRACKETS are sold separately for: 40€ – Click Here

    For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.

    not rated 165.00195.00
  • Skytraxx3 Vario Pod
    Vario Pod for skytraxx 4

    Altair Hang Gliding Pod for Skytraxx v.3 & v.4

    • Made especially for users of SkyTraxx 3 varios.
    • Fiberglass with aquaprint carbon-like coating

     

    We suggest using 8 mm bolt size for the Pod and the mount.

    3D PRINTED BASEBAR BRACKETS are sold separately for: 40€ – Click Here

    For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.

    not rated 160.00200.00