Latest Product Reviews
Bluetooth Remote Control for XCTrack / IOS Android
External Remote Bluetooth BLE with low energy consumption. Automatically connects each time you open XCTrack app.
The strap allows to fix the remote on paraglider risers.
Requires one time set up: just pair it with your phone and then set up the buttons functions in XCTrack Settings.
Rotor Harnesses
We are dealers for Rotor Harnesses.
Contact us for details via team@delta-goodies.com
Altair Speed Bar Brackets/Holders/Mounts
Please find our upright brackets here: Altair Upright Brackets/Holders/Mounts
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
Altair Upright Brackets/Holders/Mounts
More info down below.
Please find our speed bar brackets here: Altair Speed Bar Brackets/Holders/Mounts
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
Batten Number Stickers
A set of waterproof number stickers for your hang gliding battens. The best adhesion results can be achieved if the surface was cleaned with isopropyl alcohol and a little bit heated by a fan.
One set of stickers is sufficient for up to three full batten sets.
FlexiClamp for Wing Tip | Hang Gliding Camera Mount
Capture breathtaking aerial footage with our FlexiClamp Wing Tip Camera Mount, featuring our unique Flexi Clamp. This innovative clamp is designed for flexibility and durability, ensuring a perfect fit on the outer leading edge of hang gliders with tube diameters of 48-52 mm.
The FlexiClamp is lightweight yet sturdy, maintaining a secure hold without adding extra weight. Equipped with a safety hinge and a rubber-lined grip, it positions your camera for optimal shooting as the wing tip pops during flight, ideal for pilots seeking stable, high-quality footage from a wing tip angle.
FlexiClamp for Front Keel | Hang Gliding Camera Mount
Elevate your video capturing capabilities with the Delta Front Keel Tube Camera Mount, enhanced by our FlexiClamp. Specially designed for tubes of 50-54 mm, this mount offers a light, flexible, and strong attachment through the glider’s zipper.
It features a rotatable tube for precise camera adjustments, enabling 360-degree shots for versatile framing options. Installation is quick and easy. You will once need to install two additional zipper sliders (don’t worry it takes just a few minutes — see instructions below) suitable for your under-surface sail and you are good to go.
Thermal Map of the Eastern Alps – Austria, Switzerland, Italy, Bavaria
This map contains house thermals, optimal glide lines and potential landing areas for a light wind, thermal day in the alpine regions of Austria, Italy (Südtirol – Gemona), Switzerland as well as Bavaria..
Contents:
- Known house thermals: the marked house thermals are recognised hotspots , which, depending on the time of day, generally provide lift.Airfields’ radio frequencies, including military and civil frequencies
- Field landing areas – good
- Field landing areas – doable
- Field landing areas – emergency only
- Good possibilities for crossing main ridges
- Good glide lines – often with good transition possibilities
- Prominent mountains/thermals, including names and altitudes
NEW 2018
- Important mountain passes incl. altitude
- QR codes linking to important info pages
- Additional good glide lines in different areas
Delivery:
- in clear plastic sleeve and cardboard envelope or rolled in a solid mailing tube
Note: The writings are in German and in English.
Valley Wind Map of the Eastern Alps – Austria, Switzerland, Italy, Bavaria
The map displays valley wind systems and their directions of flow on normal/light-wind, thermal days in the alpine regions of Austria, Italy (Südtirol – Gemona), Switzerland as well as Bavaria.
This map is intended to assist with getting a bigger picture, seeing connections, recognizing sensitive areas and therefore to be able to understand what is happening in the atmosphere and how to read the terrain. Steep slopes, areas of convergence and lee areas are immediately identifiable.
Contents:
- normal valley wind up to 20 km/h with direction (thin arrow)
- strong valley wind over 20 km/h with direction (thick arrow)
- Lee side areas: Strong valley wind systems (e.g. Bavarian wind) often flow over slopes or ridges and create unpleasant lee side areas. We have marked many, but not all, sensitive areas.
- Known house thermals: the marked thermal sources are known and popular hotspots, which depending on the time of day, will produce more or less lift.
- Includes the majority of hang gliding and paragliding take-off sites plus take-off directions in the region of eastern Alps
- Important mountain passes incl. altitude
- Airfields
- QR codes linking to important info pages
- Explanations and information on special weather phenomena (German language)
- Detailed map of the Dolomite region with take-off and landing sites
- Shipped in clear plastic sleeve and cardboard envelope or rolled in a solid mailing tube
Note: The writings are in German and in English
Altair Hang Gliding Dual Pod POWER II
Key features:
– NEW sleek shape
– Pod housing is made to fit Compeo, Digifly AIR, Flymaster and Naviter Oudie4 instruments (*please note – the housing not interchangeable like on our Universal Pod, the hole form allows to use any of these instruments)
– Secondary pod hole allows to use a smartphone or tablet up to 165mm with Compeo installed and up to 174mm with Digifly AIR and Flymaster.
– Powerbank: MI Powerbank 2S, capacity 10000 mAh
– Powerbank is installed, powerbank buttons on the front face of the pod
– Micro USB charging cable included, Type C or Lightning – on demand
– Charging socket for powerbank – on the front panel, so there is no need to take out the powerbank for charging.
– Suggested mount – M8 female thread on pod (Flytec rod mount or other types – on demand)
3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
If you choose the aquaprint option for the color we will contact you for the details to discuss your preferences!
Altair Hang Gliding Pod for Naviter Oudie N/Oudie N FLARM
- Made especially for users of Naviter OudieN/OudieN FLARM varios.
- Fiberglass with aquaprint carbon-like coating
We suggest using 8 mm bolt size for the Pod and the mount.
3D PRINTED BASEBAR BRACKETS are sold separately for: 40€ – Click Here
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
HG-UV79UV Radio with Bluetooth 5.0 | USB C charger – 10W Hang Gliding/Paragliding
Finally here is a radio unit with Bluetooth 5.0 installed so you can connect it to your headset directly! Perfect for hang gliding and paragliding. Free yourself from endless cables! No additional Bluetooth dongle required, just pair to your headset and off you go!
And even more to it — this radio is charged with USB C !
The noise reduction performance of its built-in Bluetooth 5.0 chip is excellent. Safe and stable to use. Compatible with various helmets and Bluetooth headsets.
HG-UV79UV 10W 5KM Bluetooth Walkie Talkie VHF UHF Radio Handheld Transceiver covers multiple frequency ranges: TX 136-174MHz (FM) and 400-520MHz (FM); RX 350-400MHz; digital FM radio 76-108MHz, digital AM radio 109-136MHz.
Charge your radio with over USB C, no bulky extra chargers!
Package includes:
– 1 x Walkie Talkie Body
– 1 x Battery
– 1 x Belt Clip
– 1 x Bluetooth PTT button
– 1 x USB Power Adapter
– 1 x USB C Charging Cable
– 1 x Antenna
💡 Compatible with our headsets:
- NEW Helmet Headset E1+ Bluetooth 5.1 | High quality sound
- VODOOL Wireless Bluetooth 4.0 Headset Helmet
💡 Spare PTT button is available here
💡 Read more in ourBlog Post
Bluetooth Headset Two Way Radio For Baofeng, Kenwood, Icom, Motorolla
Description:
The hands-free earpiece provides the best audio quality when paired with BTD-002M dongle connecting two way radios and is comfortable and flexible enough for using while hang gliding.
If you would like to additionally set up your helmet with convenient Bluetooth 4.0 rechargeable set of speakers and microphone, please take a look a the link below. This additional set seamlessly connects to the presented Bluetooth radio adapter and the ptt button simultaneously.
Compatible with our headsets:
- NEW Helmet Headset E1+ Bluetooth 5.1 | High quality sound
- VODOOL Wireless Bluetooth 4.0 Headset Helmet
Light Carbon Selfie Stick for GoPro/Insta360 ONE X R | 1.5 m
Note: This is 2024 New Version, the top screw is upgraded to high strength alloy steel and the bottom part was redesigned to hold 1/4 inch screw tighter
Made from carbon fiber this super light “Invisible” selfie stick will fit GoPro/Insta 360 ONE X R and DJI Osmo action cameras.
Take the best shots in the air!
Mount Ready: Has an 1/4 inch thread at the bottom of the handle and can be easily used with Altair Upright/Speedbar brackets.
Adjustable length: 26 – 145 cm
Weight: ~ 120 g
Insta/Gopro mount comes for free together with the stick
3D PRINTED BASEBAR/UPRIGHT BRACKETS with a 1/4″ bolt are sold separately for 40/45 euro – Click Here
RADIO ACCESSORIES
PTT Button For Radio Bluetooth Headset
A Spare PTT Button For Radio Bluetooth Headset for our Bluetooth Headset Two Way Radio For Baofeng, Kenwood, Icom, Motorolla
BaoFeng UV-S9 Powerful Walkie Talkie CB Radio Transceiver
Dimensions: 400mm Length
Frequency Range: uhf/vhf
Walkie Talkie Type: Portable
Model Number: Nagoya NA-771
Brand Name: BAOFENG
Talk Range: Enhanced intercom distance
Connector: SMA-Female
Antenna Max Power: 10W
Antena Weight: 28g
Gain(MAX): 2.15db (144MHz)/3.0db(430MHz)
Uhf Vhf Antenna: NA-771
NA-771: walkie talkie Baofeng Antenna
Type: Accessories
HG-UV79UV Radio with Bluetooth 5.0 | USB C charger – 10W Hang Gliding/Paragliding
Finally here is a radio unit with Bluetooth 5.0 installed so you can connect it to your headset directly! Perfect for hang gliding and paragliding. Free yourself from endless cables! No additional Bluetooth dongle required, just pair to your headset and off you go!
And even more to it — this radio is charged with USB C !
The noise reduction performance of its built-in Bluetooth 5.0 chip is excellent. Safe and stable to use. Compatible with various helmets and Bluetooth headsets.
HG-UV79UV 10W 5KM Bluetooth Walkie Talkie VHF UHF Radio Handheld Transceiver covers multiple frequency ranges: TX 136-174MHz (FM) and 400-520MHz (FM); RX 350-400MHz; digital FM radio 76-108MHz, digital AM radio 109-136MHz.
Charge your radio with over USB C, no bulky extra chargers!
Package includes:
– 1 x Walkie Talkie Body
– 1 x Battery
– 1 x Belt Clip
– 1 x Bluetooth PTT button
– 1 x USB Power Adapter
– 1 x USB C Charging Cable
– 1 x Antenna
💡 Compatible with our headsets:
- NEW Helmet Headset E1+ Bluetooth 5.1 | High quality sound
- VODOOL Wireless Bluetooth 4.0 Headset Helmet
💡 Spare PTT button is available here
💡 Read more in ourBlog Post
Bluetooth Headset Two Way Radio For Baofeng, Kenwood, Icom, Motorolla
Description:
The hands-free earpiece provides the best audio quality when paired with BTD-002M dongle connecting two way radios and is comfortable and flexible enough for using while hang gliding.
If you would like to additionally set up your helmet with convenient Bluetooth 4.0 rechargeable set of speakers and microphone, please take a look a the link below. This additional set seamlessly connects to the presented Bluetooth radio adapter and the ptt button simultaneously.
Compatible with our headsets:
- NEW Helmet Headset E1+ Bluetooth 5.1 | High quality sound
- VODOOL Wireless Bluetooth 4.0 Headset Helmet
JETTING Artificial Fur Microphone Windshield
We recommend to use this furry windshield for the microphone of our headsets:
Helmet HEadset E1+ Bluetooth 5.1
and
VODOOL Wireless Bluetooth 4.0 Helmet Headset
NAGOYA NA-771 Dual Band Walkie Talkie Baofeng Antenna VHF/UHF
Dimensions: 400mm Length
Frequency Range: uhf/vhf
Walkie Talkie Type: Portable
Model Number: Nagoya NA-771
Brand Name: BAOFENG
Talk Range: Enhanced intercom distance
Connector: SMA-Female
Antenna Max Power: 10W
Antena Weight: 28g
Gain(MAX): 2.15db (144MHz)/3.0db(430MHz)
Uhf Vhf Antenna: NA-771
NA-771: walkie talkie Baofeng Antenna
Type: Accessories
NEW Helmet Headset E1+ Bluetooth 5.1 | High quality sound
High quality Bluetooth 5.1 headset, compatible with our Bluetooth Radio solutions for hang gliding and paragliding.
💡 Compatible with:
- Our NEW Radio HG-UV79UV with integrated Bluetooth 5.1
- Bluetooth BT Dongle for Baofeng, Kenwood, Motorola radios
💡 As a recommendation we suggest using the furry wind shield for the best noise reduction: BUY HERE
VARIO PODS AND MOUNTS
FlexiClamp for Front Keel | Hang Gliding Camera Mount
Elevate your video capturing capabilities with the Delta Front Keel Tube Camera Mount, enhanced by our FlexiClamp. Specially designed for tubes of 50-54 mm, this mount offers a light, flexible, and strong attachment through the glider’s zipper.
It features a rotatable tube for precise camera adjustments, enabling 360-degree shots for versatile framing options. Installation is quick and easy. You will once need to install two additional zipper sliders (don’t worry it takes just a few minutes — see instructions below) suitable for your under-surface sail and you are good to go.
FlexiClamp for Wing Tip | Hang Gliding Camera Mount
Capture breathtaking aerial footage with our FlexiClamp Wing Tip Camera Mount, featuring our unique Flexi Clamp. This innovative clamp is designed for flexibility and durability, ensuring a perfect fit on the outer leading edge of hang gliders with tube diameters of 48-52 mm.
The FlexiClamp is lightweight yet sturdy, maintaining a secure hold without adding extra weight. Equipped with a safety hinge and a rubber-lined grip, it positions your camera for optimal shooting as the wing tip pops during flight, ideal for pilots seeking stable, high-quality footage from a wing tip angle.
Altair Hang Gliding Pod for Naviter Oudie N/Oudie N FLARM
- Made especially for users of Naviter OudieN/OudieN FLARM varios.
- Fiberglass with aquaprint carbon-like coating
We suggest using 8 mm bolt size for the Pod and the mount.
3D PRINTED BASEBAR BRACKETS are sold separately for: 40€ – Click Here
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
Altair Speed Bar Brackets/Holders/Mounts
Please find our upright brackets here: Altair Upright Brackets/Holders/Mounts
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
Altair Hang Gliding Dual Pod POWER with BT Vario and Pitot tube II
– AltAIR bluetooth vario with speed sensor (Pitot tube) and a new programmable 9 keys keyboard (18 functions!) on the front panel
– NEW sleek shape
– Pod housing is made to fit Compeo, Digifly AIR, Flymaster and Naviter Oudie4 instruments (*please note, the housing is not interchangeable like on our Universal Pod, but the hole shape allows to use any of these instruments)
– Secondary pod hole allows to use a smartphone or tablet up to 165mm with Compeo installed and up to 174mm with Digifly AIR and Flymaster.
– Powerbank: MI Powerbank 2S, capacity 10000 mAh
– Powerbank is installed, powerbank buttons on the front face of the pod
– Micro USB charging cable included, Type C or Lightning – on demand
– Charging socket for powerbank – on the front panel, so there is no need to take out the powerbank for charging
– Suggested mount – M8 female thread on pod (Flytec rod mount or other types – on demand)
3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
Choose from one of our unique AquaPrint Looks for the Pods. See the Image with the number down in the description.
If you like a special aquaprint option for the color — contact you for the details to discuss your preferences!
Altair Hang Gliding Dual Pod II
Key features:
– NEW sleek shape
– Pod housing is made to fit Compeo, Digifly AIR, Flymaster and Naviter Oudie4 instruments (*please note – the housing not interchangeable like on our Universal Pod, the hole form allows to use any of these instruments)
– Secondary pod hole allows to use a smartphone or tablet up to 165mm with Compeo installed and up to 174mm with Digifly AIR and Flymaster.
– Place for the suggested powerbank (MI Powerbank 2S, capacity 10000 mAh)
– Powerbank is not installed
– Suggested mount – M8 female thread on pod (Flytec rod mount or other types – on demand)
3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
If you choose the aquaprint option for the color we will contact you for the details to discuss your preferences!
Altair Upright Brackets/Holders/Mounts
More info down below.
Please find our speed bar brackets here: Altair Speed Bar Brackets/Holders/Mounts
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
Universal Hang Gliding POD for Compeo+/6030, Digifly, Flymaster, Odie 4, Volirium, Smartphone, E-reader
Each fiberglass pod consists of two parts: a universal pod body and an interchangeable cover.
Please bear in mind the speedbar/upright bracket is sold separately here.
Got a new instrument or have two different ones?
No need to buy second pod, just a new cover for only 40€ or order a custom design for only 100€ additional cover (see it here)
The pod with covers for The pod with covers for Flytec 6030, Digifly AIR, Naviter Oudie 4, Flymaster live, Volirium P1, Oudie N, Smartphone (174×84 mm), E-reader or tablet (174 mm max) are available;
Price: EUR 160 – pod with one cover in black or white;
Any Pod can be made in Aquaprint look of your choice (30€ extra) – see the pictures for the colour options.
3D PRINTED BASEBAR BRACKETS are sold separately for: 40€ – Click Here
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
Racing Pod Smartphone 83×154 mm | Optional Power Bank
Made especially for users of XCSoar, XCTrack, LK8000 and AltAIR apps.
The Racing Pod comes in three versions:
-
- Racing Pod SHELL only
- Racing Pod POWER
Built-in 10000 mAh powerbank to keep smartphone charged all day
Possibility to change batteries (3×18650 type Li-Ion cells are used)
-
- Racing Pod ALTAIR with Vario and Pitot Tube connecting over Bluetooth 5.0 to your smartphone.
The use of AltAIR sensor from Evgen Lysenko and AltAIR android app also adds a possibility to use installed fully programmable hardware keys for in-flight control, Pitot tube for measuring airspeed, live tracking, leader chasing and many other cool features (the program itself is available for free)
Further details:
- Use almost any smartphone up to 5,7″ screen (max phone size 83×154 mm, for bigger version Click Here)
- Possibility to use any upright/speedbar mounts including Flytec/Brauniger
- Possibility to use smartphone power and volume buttons
Any Pod can be made in Aquaprint look of your choice (30€ extra) – see the pictures for the colour options.
3D PRINTED BASEBAR BRACKETS are sold separately for: 40€ – Click Here
For the customers from the USA, Norway and Canada – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
Altair Hang Gliding Dual Pod POWER II
Key features:
– NEW sleek shape
– Pod housing is made to fit Compeo, Digifly AIR, Flymaster and Naviter Oudie4 instruments (*please note – the housing not interchangeable like on our Universal Pod, the hole form allows to use any of these instruments)
– Secondary pod hole allows to use a smartphone or tablet up to 165mm with Compeo installed and up to 174mm with Digifly AIR and Flymaster.
– Powerbank: MI Powerbank 2S, capacity 10000 mAh
– Powerbank is installed, powerbank buttons on the front face of the pod
– Micro USB charging cable included, Type C or Lightning – on demand
– Charging socket for powerbank – on the front panel, so there is no need to take out the powerbank for charging.
– Suggested mount – M8 female thread on pod (Flytec rod mount or other types – on demand)
3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
If you choose the aquaprint option for the color we will contact you for the details to discuss your preferences!
Altair Hang Gliding Dual Pod POWER with BT Vario and Pitot tube II
– AltAIR bluetooth vario with speed sensor (Pitot tube) and a new programmable 9 keys keyboard (18 functions!) on the front panel
– NEW sleek shape
– Pod housing is made to fit Compeo, Digifly AIR, Flymaster and Naviter Oudie4 instruments (*please note, the housing is not interchangeable like on our Universal Pod, but the hole shape allows to use any of these instruments)
– Secondary pod hole allows to use a smartphone or tablet up to 165mm with Compeo installed and up to 174mm with Digifly AIR and Flymaster.
– Powerbank: MI Powerbank 2S, capacity 10000 mAh
– Powerbank is installed, powerbank buttons on the front face of the pod
– Micro USB charging cable included, Type C or Lightning – on demand
– Charging socket for powerbank – on the front panel, so there is no need to take out the powerbank for charging
– Suggested mount – M8 female thread on pod (Flytec rod mount or other types – on demand)
3D PRINTED BASEBAR/UPRIGHT BRACKETS are sold separately for: 35/40 euro – Click Here
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
Choose from one of our unique AquaPrint Looks for the Pods. See the Image with the number down in the description.
If you like a special aquaprint option for the color — contact you for the details to discuss your preferences!
Altair Hang Gliding Pod for Skytraxx v.3 & v.4
- Made especially for users of SkyTraxx 3 varios.
- Fiberglass with aquaprint carbon-like coating
We suggest using 8 mm bolt size for the Pod and the mount.
3D PRINTED BASEBAR BRACKETS are sold separately for: 40€ – Click Here
For the customers from the USA and Norway – Please contact your Altair dealer for purchasing this product. The list of the dealers can be found here.
Used Hang Gliders
Aeros Combat 12,7 GT
- Year of Production: 2015
- Frame:
– Aeros carbon speedbar and black anodized uprights
– 10 mm carbon battens
– Carbon fibre leading edge inserts
– Adjustable CG System - Sail: Technora
- Total flying time: ~ 50 flights
- Overall condition: Very good
- Last check done in 28.06.2019 by Primoz Gricar
Contact us for details or contact the owner directly Tel: 0049-15771983684 / Arnim.
Moyes Litespeed S4
- Year of Production: 2010
- Frame: Full carbon incl. leading edges, divesticks, speedbar, zoom uprights
- Sail: Code Zero
- Total flying time: ~ 50 hrs
- Overall condition: Like new, crash-free
- Set up and test flown by Olav Opsanger, norwegian Moyes dealer
HANG GLIDING PRINTS
We are selling beautiful hang gliding posters, postcards and calendars that are printed on premium paper. The sizes and finishing can be customized upon your preferences.
We believe beautiful photography will help to promote our sport. Also on your wall.
Altair Vario Pods
State of the art, thought through in every detail, customized for nearly every vario on the market.
Have a look at all possible options and find yours.
